| Enclosure |
| |
None; circuit board (4 corner
holes for mounting) |
| Connectors |
| |
NETWORK |
(1) 4-pin male connector; to
Cresnet control network |
| |
POWER |
(1) 2-pin male connector; to
any device requiring power (24 VDC, 500mA) |
| |
INPUT |
(1) 20-pin male connector;
to custom (non-Crestron) control panel's buttons or switches |
| |
OUTPUT |
(1) 20-pin male connector,
to LED indicator on custom (non-Crestron) panel |
| LED Indicators |
| |
PWR |
Indicates when 24 VDC is supplied
to unit from network |
| |
ACT |
Indicates communication between
network and unit |
| Output Voltage |
| |
0 (min) to 24 VDC (max) |
| Output Current per Output |
| |
200mA (max) subject to max total
current |
| Output Current (Total) |
| |
1A (total for outputs 1-8);
1A (total for outputs 9-16) |
| Power |
| |
Requirements |
24VDC network power |
| |
Cresnet Power Factor |
15W (average) (approx. 2.5W+1W/incandescent
bulb) (approx. 2.5W+0.5W/LED) |
| Dimensions |
| |
2.50" / 6.35cm (H) x
4.60" / 11.68cm (W) x
0.50" / 1.27cm |
| Weight |
| |
0.19lb / 0.09kg |
