AVE Verhengsten GmbH & Co.

 

 

Crestron C2N-DAP8

C2N-DAP8RC – 7.1 Surround Sound
Audioprozessor mit Room Control und CAT5 Video

Der C2N-DAP8RC vereinigt die Funktionen des CNX-RMCLV Room Control Moduls (Audio und Videoverteilung über CAT5,Steuerausgänge) mit den digitalen surround sound Möglichkeiten des C2N-DAP8. Das Resultat ist kosteneffektiver surround sound in jedem Zimmer des Hauses. Der C2N-DAP8RC arbeitet auch als Steuereinheit für die lokalen Audio und Videoquellen wie z.B.Projektor, DVD, Videorekorder usw. Eine bidirektionale RS-232 Schnittstelle und 4 Infrarot Steuerausgänge sind integriert. Ein Stromsensoreingang ist für die Überwachung eines Gerätes mittels eines zusätzlichen Stromsensors (CNXRMCS) ebenfalls vorhanden. Ein Infraroteingang ermöglicht die Integration eines zusätzlichen Infrarotempfängers (CNX-RMIRD). Mit dessen Hilfe ist es möglich das komplette Crestron System über eine Philips Pronto oder über eine ähnliche Universalfernbedienung zu steuern. Selbstverständlich kann der C2N-DAP8RC auch mit jedem Crestron Touchpanel und Tastentableau gesteuert werden.

 

Technische Details Crestron C2N-DAP8RC:
Connectors
  RS-232 Output 6-Pin RJ-11
  IR Input 1 mini stereo phone jack (power, ground, signal)
  IR Outputs 4 mini phone jacks (ground, signal)
  SENS Input 2-pin mini-phoenix contact closure connector for use with a current sensor to detect power status of devices such as televisions.
  Cresnet 4-pin mini-phoenix network connector used to supply power and connect the C2N-DAP8RC to the Cresnet system
Video Connectors
  Head End Video Inputs RJ45 CAT5 (1-4) 4 channels of balanced video with cable length compensation on 1-3.
  Local Video Inputs 12 RCA with built-in 75 ohm termination, all 12 inputs have video sensor capability. Any combination of composite, S-Video, Component Video including HDTV
  Head End Video Return RJ45, 4 channels of balanced video
  Local Video Outputs 12 RCA
  Video Input Compensation 1-3 Adjustable independently by video input to compensate for varying CAT5 cable lengths.The fourth signal has a fixed compensation network and is intended for digital audio.
Audio Connectors
  Coax Digital Inputs 2x(SPDIF), RCA each
  Fiber Optic Inputs Toslink
  Stereo Input 10 RCA, 1 pair for each of 5 sources
  Stereo differential I/O RJ45 (connects to CNX-BIPAD8) for balanced input/output and 2 P/O RCA for stereo output of same signal (can be used as record output)
  Stereo Output 2 RCA stereo output of DSP input, but with volume/tone control (can be used with TV if surround sound is not active)
  Surround Sound Output 8 RCA for 7.1 surround sound output
LED Indicators
  PWR Indicates power supplied to the unit
  NET Indicates communication between the Cresnet system and the C2N-DAP8RC
  Setup LED/pushbutton switch for use with future functions
Video
  Local Video Bandwidth 60 MHz
  Crosstalk <60dB
Surround Sound Modes
  Modes PCM up to 96KHz; Dolby Pro Logic; Dolby Pro Logic II; Dolby Digital 5.1; Dolby digital EX; DTS 5.1; DTS ES Discrete 6.1; DTS ES Matrix 6.1; DTS Neo:6 Cinema; DTS Neo:6 Music

 

 

 

zurück | Seitenanfang